RCD360 PRO2 Wired Carplay Android auto Assistance & FAQs
Installation Guide | Plug and Play
This installation video shows the complete process of connecting the head unit with our SCUMAXCON standard rear camera.
If you do not plan to install a rear camera, you can simply watch the head unit installation part. The head unit installation itself is plug and play.
This sample stereo is our RCD360 PRO3S. The only difference between models is whether wireless function is supported.
Video includes: head unit installation, wiring connection, and standard rear camera setup.
Troubleshooting & FAQs
If you are unsure, please contact our support team and send clear photos of your vehicle wiring.
1. Power Cable Not Compatible / Doesn’t Fit
Issue: Power cable does not match the original car plug.
- Quadlock: Use standard power cable.
- ISO: Requires Plug-B for ISO
- MQB: Direct connection, no power cable needed.
2. Original Wiring Modified / Aftermarket Harness
Modified wiring may cause CAN signal mismatch.
- Email us: service@scumaxcon.com
- Send clear photos of current wiring
- We confirm the correct adapter
Polo 2009–2017 note:
3. Battery Drain / Stereo Not Powering Off
Cause: Outdated CAN gateway.
- Radio stays on after key removal
- Backlight remains on
Solution: Use the yellow power-drain fix wire.
4. Steering Wheel Buttons (8-Button Type) Not Working
Requires CAN simulator decoder (YX2219).
5. Poor FM / AM Signal
May require Fakra antenna adapter.
6. Reverse Camera Not Working
Check camera type (RGB / AV / MIB).
Some RGB cameras require an adapter; dynamic guidelines may not display after conversion.
7. CarPlay Not Connecting
Issue: iPhone not connecting to CarPlay.
- USB cable: Try original Apple cables.
- iPhone system: Reset network settings.
- USB port: Check for looseness.
Still not working? Contact us for assistance: service@scumaxcon.com
Fill in the information and successfully submit to receive a two-year warranty.
Need assistance? Please contact our technical experts directly: service@scumaxcon.com